All good

I would not buy this again. my own opinion, there was a total lack of information on how to set this device.perhaps I'm dumb as a brick

An excellent value PSU whicn can output up to 10A. The best improvement that could be added would be bettet adjustment of the voltage and current limits (multi-turn pots for fine adjustment. I might add these myself. It would be a straightforward mod the should'nt cost too much.

I'm somewhat disappointed in this unit, I have several other bench power supplies of a similar price all have the ability to setup the desired output voltage and current limit settings before applying the load. This simple load on off switch is missing from this unit and it presents a problem in sofar that you have to physically remove the connections from the unit to the load to be able to do the settings. This is becomes particularly problematic on large loads and fairly high voltage output for example 24V electronic loads. You either risk sparks by using the probs to the load with the unit turned on or connect the load and hope you actually had the right settiiings when applying the main unit power switch.The cost of adding a load on /off swicth would be minimal and seems a really bad omission. Just being able to see the readouts to confirm they are what you need before applying the load is really a necessary feature sadly missing from this unit.Load ripple current is fine, but it lags a bit on keeping up with a varying electronic load so the output voltage fluctuates more than I would expect from this unit compared with the similar priced units I alreay use on my bench.

Crackling noise from inside on CC mode settings up to 2amps. Sounds like electrical component shorting / breaking down. From experience on other electronic devices with internal power supplies, this will fail in a short period of time.

Excellent saved the day on numerous occasions to charge things I've either lost the charger to or just never had a charger for also to test a mobility scooter for the broken part which worked nicely.

What value for money. Smashing product

nice little power supply for the money course adjustment a bit sensitive but does what in should on the at the end of the day pleased with purchase

Bad pointsBuild Quality not brilliant tiny case, 4mm dip in front glass 0.3 volts out, and same on amp too The leads only just hold 9.5amps short time only, adjustment course and fine very sensitive not looked inside. price little high for what you get £45 maybe near the mark for the Quality of productGood points it holds the 9.8amps ok voltage stays stable cross fingers it lasts would I by again No sorry real review here

Ok to be fair it’s not a bad product for a reasonable price but it’s not perfect. A couple of issues I have seen firstly the usb 5v socket is stated at 2.0A but it does not deliver up to 2 amps I tested with my USB tester and it only delivered 600mA to the connected device while a standard Apple plug top charger delivered 1.6 Amps to the same device using the same lead. Using a good quality multi meter monitoring the output it delivers approximately 0.1v more than indicated on the power supply. So happy to keep the product not returning it but disappointed with the USB charging. Not used to much at the moment so cannot comment on the reliability only the future will tell.